TANDBERG E5714 DSNG Voyager, Reference Manual

Page: 148 / 314

Operating the Equipment Locally — Audio Menu: Dolby (AC-3) Pass-thru, Dolby E Pass-thru and DTS Pass-thru Menu
Page 4-70 Reference Guide: E57xx DSNG and DENG Voyager Encoder
ST.RE.E10076.3
Table 4.65: SMPTE 302M Standard Options
Selected Option Description
1998 Standard Refers to the 1998 SMPTE 302M standard.
2000 Standard Refers to the 2000 SMPTE 302M standard.
Channel Option
This option is only available if the coding standard is Dolby E Pass-thru or
DTS Pass-thru. It controls the value written to the channel identification
field in the (SMPTE 302M) AES3 data elementary stream header.
Table 4.66: Channel Options
Valid Input Range Description
Min: 0
Max: 15 This value is written to the channel identification field in
the (SMPTE 302M) AES3 data elementary stream
header.
Embedded 1-2 DID Option
This option defines the DID to be de-embedded to obtain the audio source
for SDI Embedded 1 and SDI Embedded 2. If this is set to 1024, then the
default DID will be used. Refer to Annex F, Audio Modes for information
about DIDs.
Table 4.67: Embedded 1-2 DID Options
Selected Option Description
Min: 0
Max: 1023
Other: >1023
Off
Select DID
Default DID
Embedded 3-4 DID Option
This option defines the DID to be de-embedded to obtain the audio source
for SDI Embedded 3 and SDI Embedded 4. If this is set to 1024, then the
default DID will be used. Refer to Annex F, Audio Modes for information
about DIDs.
Audio PID Option
This option sets the PID to be used for the audio channel. In the event of a
PID clash, one of the PIDs will be changed by the Encoder’s internal
checking algorithm.
To be DVB compliant the audio PID should not be less than 32. However it
is possible to set the PID to less than 32, but in the event of a PID clash
the Encoder’s internal checking algorithm will not resolve the conflict.
Component Tag Option
This item defines the optional component tag to be assigned to this audio
stream.