manualshive.com logo in svg

TANDBERG E5714 DSNG Voyager, Reference Manual

Share
Download
TANDBERG E5714 DSNG Voyager Reference Manual Download Page 140

  

Operating the Equipment Locally — Audio Menu: Dolby Digital (AC-3) Menu 

Page 4-62 

Reference Guide: E57xx DSNG and DENG Voyager Encoder  

 

ST.RE.E10076.3 

Table 4.48: Audio Bit-rate Options (Dolby Digital (AC-3)) 

Available 
Settings 

Dolby Digital 

 

1/0(C) 

2/0(L,R) 

32 kbit/s 

8

 

8

 

48 kbit/s 

8

 

8

 

56 kbit/s 

9

 

8

 

64 kbit/s 

9

 

8

 

80 kbit/s 

9

 

8

 

96 kbit/s 

9

 

9

 

112 kbit/s 

9

 

9

 

128 kbit/s 

9

 

9

 

160 kbit/s 

9

 

9

 

192 kbit/s 

9

 

9

 

224 kbit/s 

9

 

9

 

256 kbit/s 

9

 

9

 

320 kbit/s 

9

 

9

 

384 kbit/s 

9

 

9

 

448 kbit/s 

9

 

9

 

512 kbit/s 

9

 

9

 

576 kbit/s 

9

 

9

 

640 kbit/s 

9

 

9

 

Coding Mode Option 

This option sets the audio coding mode. If the current audio bit-rate is 

outside the bit-rate range supported by the new coding mode, the bit-rate 

is automatically changed to the lowest value within the supported range. 

Table 4.49: Coding Mode Options 

Selected Option 

Description 

1/0(C) (Left) 

Single channel mono audio, encoding the left channel. 

1/0(C) (Right) 

Single channel mono audio, encoding the right channel. 

2/0(L,R) 

Dual channel stereo audio coding. 

Auto Lip Sync Option

9

 

This option controls whether the Encoder automatically adjusts the audio 

delay to maintain lip sync with the video. If the Encoder is being controlled 

via SNMP by a control system that has auto lip sync functionality, then this 

should be set to off. 
See the text underneath Table 4.12 on page 4-28 for use of this facility.  

                                                     

9

 To ensure correct lip sync when working with linear or pre-encoded audio, use the option card M2/EOM2/AUDLIN2. 

Summary of Contents for E5714 DSNG Voyager



























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands