TANDBERG E5714 DSNG Voyager, Reference Manual

Page: 101 / 314

Operating the Equipment Locally — System Menu Service Info Menu (Syntax = DVB)
Reference Guide: E57xx DSNG and DENG Voyager Encoder Page 4-23
ST.RE.E10076.3
Service Type Option
The service type identifies the type of service carried. The options are:
Analog TV, Digital TV, Digital Radio, Teletext, and Data Broadcast. The
information is included in the SDT.
PMT PID Option
This shows the Program Map Table Packet Identifier.
Stream ID Descriptor Option
This option turns on or off the insertion of a stream identifier descriptor
within the PMT.
Dolby AC-3 Descriptor Option
This allows a user to specify only the DVB, only the ATSC, or both the
ATSC and DVB descriptors for use with audio streams.
It is necessary because the ATSC descriptor existed prior to the DVB
descriptor and some Decoders (e.g. early Alteias) used the AC-3 descriptor
for identifying Dolby Digital AC-3 streams.
NOTE…
This is only available when the syntax is set to DVB.
Table 4.6: Audio AC-3 Descriptor Options
Selected Option Description
DVB & ATSC Both the ATSC and DVB descriptors are used with the audio streams.
DVB only Only the DVB descriptors are used with the audio streams.
ATSC only Only the ATSC descriptors are used with the audio streams.
Logical Chan Desc Option
This enables the Logical Channel Descriptor to be turned On or Off. The
information is included in the NIT (for Australia mainly).
Logical Channel Option
NOTE…
This option is only shown if the Logical Chan Desc option is set to On.
This enables a number to be given to the Logical Channel.
4.7.4 Remote Control Menu
Overview
The Encoder can be controlled remotely via either an RS-232 or a RS-485
serial link, or alternatively via Ethernet using either SNMP, or a web
browser. The
Remote Control Menu
provides options for configuring these
interfaces. See Figure 4.9 for the
Remote Control Menu
structure.