TANDBERG E5714 DSNG Voyager, Reference Manual

Page: 113 / 314

Operating the Equipment Locally — Video Menu: Video Source Menu
Reference Guide: E57xx DSNG and DENG Voyager Encoder Page 4-35
ST.RE.E10076.3
Background Colour Option
This option defines the background colour for any on-screen messages
generated by the Encoder (e.g. by the Ident test pattern).
CAUTION…
Make the background colour a contrast to the text otherwise the text will not be seen!
Table 4.19: Background Colour Options
Available Options
White Blue Magenta Yellow Green Pink
Black Red Orange Grey Cyan
Video Bandwidth Option
The Video Bandwidth Option controls the filtering of the video before it is
compressed. Reducing the bandwidth requires slightly less bits in the
compressed bit-stream. Refer to ST.AN.BW.E10074 for more information.
Table 4.20: Video Bandwidth Options
Selected Option Description
Sharp Filter is at the maximum bandwidth possible for the resolution selected.
Medium Slightly reduced bandwidth.
Soft Reduced a little further.
Auto Automatically adjusts the bandwidth depending on the video bit-rate and resolution settings.
OP Video Loss Option
This option gives the choice of what is displayed on the television screen in
the event of losing video input.
Table 4.21: OP Video Loss Options
Selected Option Description
Freeze Frame The last video frame received is encoded if the video input is lost.
Black A black screen is encoded if the video input is lost.
Bars & Red Bars and red test pattern is encoded if the video input is lost.
Ident The last video frame received is encoded if the video input is lost. Text message is superimposed.
Black + Ident A black screen is encoded if the video input is lost. Text message is superimposed.
Bars & Red + Ident Bars and red test pattern is encoded if the video input is lost. Text message is superimposed.
No Video PID The video PID is no longer transmitted, but it is still referenced in the SI.
No ASI O/P The ASI output is turned off
Input Termination Option
This enables the termination of the analogue video input to be switched On
or Off.