manualshive.com logo in svg

TANDBERG E5714 DSNG Voyager, Reference Manual

Share
Download
TANDBERG E5714 DSNG Voyager Reference Manual Download Page 189

  

Operating the Equipment Locally — Mux Menu: Remux Menu (option) 

Reference Guide: E57xx DSNG and DENG Voyager Encoder 

Page 4-111 

ST.RE.E10076.3 

Audio (Type of Audio) Option 

NOTES… 
1. 

This option is status only for the Host Encoder but can be changed for incoming services. 

2. 

The option could be Audio (MPEG-2), Audio (Dolby Digital) etc. The words in the brackets 

change according to the type of audio that was previously selected. 

This option is used for entering or updating audio PIDs.  
To be DVB compliant, PIDs below 32 are reserved. Therefore PIDs 32 to 

8191 are available for use. In the event of a clash, one of the PIDs will be 

changed by the Encoder’s internal checking algorithm 

Table 4.141: Audio (Type of Audio) Options 

Selected Option 

Description 

Min:  

1 

Max:  

8190 

(1FFEh) 

Step Size:   

1 

 

Data (Type of Data) Option 

NOTES… 
1. 

This option is status only for the Host Encoder but can be changed for incoming services. 

2. 

The option could be Data (RS-232), Data (RS-422) etc. The words in the brackets change 

according to the type of data that was previously selected. 

This option is used for entering or updating data PIDs.  

Table 4.142: Data (Type of Data) Options 

Selected Option 

Description 

Min:  

1 

Max:  

8190 

(1FFEh) 

Step Size:   

1 

 

Teletext Option 

NOTE… 
This option is status only for the Host Encoder but can be changed for incoming services.  

This option is used for entering or updating Teletext PIDs.  

Table 4.143: Teletext Options 

Selected Option 

Description 

Min:  

1 

Max:  

8190 

(1FFEh) 

Step Size:   

1 

 

Summary of Contents for E5714 DSNG Voyager



























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands