TANDBERG Border Controller User Manual
11.3.23
SubZoneDelete
xCommand SubZoneDelete <index>
Deletes the indexed subzone.
11.3.24
TraversalZoneAdd
xCommand TraversalZoneAdd
Creates a new traversal zone, allowing a TANDBERG Gatekeeper to connect to the Border
Controller. Up to 50 such zones may be created.
The new zone is pre-configured with a link to the traversal subzone and with a pattern match
mode of
AlwaysMatch
.
11.3.25
TraversalZoneDelete
xCommand TraversalZoneDelete <index>
Removes the traversal zone with the specified index.
11.3.26
ZoneAdd
xCommand ZoneAdd <name> <address>
Adds a new zone with the specified name and IP address. E.g.
xCommand ZoneAdd B 10.0.0.30
The zone is pre-configured with a link to the traversal subzone and a pattern match mode of
AlwaysMatch
.
11.3.27
ZoneDelete
xCommand ZoneDelete <index>
Removes the zone with the specified index.
11.4
History
The history root command,
xhistory
, is used to display historical data on the Border Controller.
To list all xhistory commands type:
xhistory ?
To list all history data, type:
xhistory
61
