TANDBERG D13691.03 User Manual Download Page 60

Page: 60 / 84

TANDBERG Border Controller User Manual

11.2.16

Subzones

xConfiguration SubZones DefaultSubZone Bandwidth PerCall Limit:

<1..100000000>

Per call bandwidth of the default subzone.

xConfiguration SubZones DefaultSubZone Bandwidth PerCall Mode:

Whether or not the default subzone is enforcing total bandwidth restrictions.

None

corresponds to

no bandwidth available.

xConfiguration SubZones DefaultSubZone Bandwidth Total Limit:

<1..100000000>

Total bandwidth available on the default subzone.

xConfiguration SubZones DefaultSubZone Bandwidth Total Mode:

Whether or not the default subzone is enforcing per-call bandwidth restrictions.

None

corresponds

to no bandwidth available.

xConfiguration SubZones TraversalSubZone Bandwidth PerCall Limit:

<1..100000000>

Per-call bandwidth available on the traversal subzone.

xConfiguration SubZones TraversalSubZone Bandwidth PerCall Mode:

Whether or not the traversal subzone is enforcing per-call bandwidth restrictions.

None

corre-

sponds to no bandwidth available.

xConfiguration SubZones TraversalSubZone Bandwidth Total Limit:

<1..100000000>

Total bandwidth available on the traversal subzone.

xConfiguration SubZones TraversalSubZone Bandwidth Total Mode:

Whether or not the traversal subzone is enforcing total bandwidth restrictions.

None

corresponds

to no bandwidth available.

xConfiguration SubZones SubZone [1..100] Bandwidth PerCall Limit:

<1..100000000>

Per-call bandwidth available on the indexed subzone.

xConfiguration SubZones SubZone [1..100] Bandwidth PerCall Mode:

Whether or not the indexed subzone is enforcing per-call bandwidth restrictions.

None

corre-

sponds to no bandwidth available.

xConfiguration SubZones SubZone [1..100] Bandwidth Total Limit:

<1..100000000>

Total bandwidth available on the indexed subzone.

Summary of Contents for D13691.03





















































































Search results

Summary of Contents for D13691.03

Reviews:

Related manuals for D13691.03

Brands by name

Popular brands

TANDBERG D13691.03, User Manual

Search results

Summary of Contents for D13691.03

Reviews:

Related manuals for D13691.03

Brands by name

Popular brands