TANDBERG Border Controller User Manual
•
When the upload is completed you should see the following:
•
Press Restart. You should see a confirmation window:
•
The system will then perform a second reboot to restore system parameters. After 3–4
minutes, the Border Controller is ready for use.
10.2
Upgrading Using SCP
Using SCP you need to transfer two files to the Border Controller:
1. A text file containing the release key.
2. A file containing the software image.
NOTE
Make sure you transfer the release key file before transferring the software image. Also
make sure you name the files exactly as described below.
NOTE
The release key file should contain just the 16 character release key.
To upgrade using SCP, do the following:
•
Make sure the system is turned on and available on IP.
•
Upload the release key file using scp to the /tmp folder on the system e.g.
scp release-key [email protected]:/tmp/release-key
•
Enter password when prompted.
•
Copy the software image using SCP. The target name must be
/tmp/tandberg-image.tar.gz
,
e.g.
scp s42100q30.tar.gz [email protected]:/tmp/tandberg-image.tar.gz
41
