TANDBERG Border Controller User Manual
2
Installation
2.1
Precautions
•
Never install communication equipment during a lightning storm.
•
Never install jacks for communication cables in wet locations unless the jack is specifically
designed for wet locations.
•
Never touch uninstalled communication wires or terminals unless the communication line
has been disconnected at the network interface.
•
Use caution when installing or modifying communication lines.
•
Avoid using communication equipment (other than a cordless type) during an electrical
storm.
•
There may be a remote risk of electrical shock from lightning.
•
Do not use communication equipment to report a gas leak in the vicinity of the leak.
•
The socket outlet shall be installed near to the equipment and shall be easily accessible.
•
Never install cables without first switching the power OFF.
•
This product complies with directives: LVD 73/23/EC and EMC 89/366/EEC.
•
Power must be switched off before power supplies can be removed from or installed into
the unit.
2.2
Unpacking
The TANDBERG Border Controller is delivered in a special shipping box which should contain
the following components:
•
Border Controller unit
•
Installation sheet
•
User manual and other documentation on CD
•
Rack-ears and screws
•
Kit with 4 rubber feet
•
Cables:
–
Power cables
–
One Ethernet cable
–
One null-modem RS-232 cable
3
