38
D13898.08
MAY 2009
TANDBERG
CONTENT SERVER
ADMINISTRATOR GUIDE
Table of
Contents
Introduction
Installation
Quick Setup
TCS
Administration
Backing up and
Restoring
Administrator
Settings
Conference
Setup
View
Conferences
Appendices
Site Settings
Administrators need to review and configure
Site Settings
options before putting the system into production.
The Site Settings page is automatically refreshed every 10
seconds.
About Site Settings
The Site Settings options
Site Settings
menu items include:
•
System Information
•
Gatekeeper Settings
•
Advanced H.323 Settings
•
SIP Settings
•
Authentication
•
API
•
User Properties
•
System Defaults
All changes made in the
Site Settings
page need to be confirmed by clicking the
Save
button at the top or bottom of the page.
The Site Settings page is available for editing even if the Content Server is in call. Most settings from the Site Settings page can be
changed and applied while the Content Server is in call.
The exceptions are
Gatekeeper settings
,
Advanced H.323 settings
,
SIP settings, System name
and
Default Recording Alias
. Any
changes made in those fields will not be applied until all calls on the Content Server have finished.
If calls are in progress when the Save Settings button was clicked, the Content Server will automatically enter
Configuration Reload
mode
. In this mode, the Content Server will not accept incoming calls or make outgoing calls.
The following indications are available that the Content Server is in
Configuration Reload
mode:
•
The Site Settings page will display: ‘The TANDBERG Content Engine is currently in <number of live calls> calls. Your Content Server
is in a call and will not accept any further calls until all calls have ended and the settings have been applied or
End all calls
.’
•
The Create Conference interface will display ‘There are no resources available to make a call, please try again later’.
•
The Server Overview page and the LCD panel will display: ‘Reloading configurations’.
When the call or calls currently in progress are completed, new settings will be applied and the Content Server will be able to receive
and make calls.
The administrator may also choose to override the Configuration Reload mode and apply changes immediately by clicking on the
End
All Calls
button in Site Settings, which will terminate calls on the Content Server.
Applying Site Settings