26
D13898.08
MAY 2009
TANDBERG
CONTENT SERVER
ADMINISTRATOR GUIDE
Table of
Contents
Introduction
Installation
Quick Setup
TCS
Administration
Backing up and
Restoring
Administrator
Settings
Conference
Setup
View
Conferences
Appendices
LCD Panel: Restoring to Default Settings
About Restoring to Default Settings
The administrator can restore the Content
Server to default settings partially or fully via
the LCD panel.
A partial restore to default settings—
Config
Restore
—restores the default configuration
files and templates, but does NOT affect the
content stored on the server.
A full restore to default settings—
Full Restore
—removes content and deletes all media files
in addition to restoring the factory configuration
files and templates.
Restoring to defaults command in v.3.x
will restore the Content Server to v.3.x
defaults, but it will also remove any
configurations specific to v.2.x, if the Content
Server has been upgraded to v3.0 from v2.x!
What Does Config Restore Do?
Deletes all user-created recording aliases, call
configuration files, templates and unused media
servers and restores v.3.x defaults.
What Does Full Restore Do?
Restoring to Default Settings
Command Menu Structure
IP Settings
Commands
Version Info
Restart?
No
Yes
Shutdown?
No
Yes
- Restore Defaults -
full Restore
Config Restore
full Restore?
No
Yes
Config Restore?
No
Yes
Restart and Shutdown
are described on the
previous page.
IP Settings are
described in
Installation
.
Press
Enter
to display the
Main Menu
screen.
From the
Main Menu
screen, use the
Up
or
Down
arrow to select
Commands
.
Press
Enter
to confirm your selection.
From the
Commands
menu, use the
Up
or
Down
arrow to select
Restore
Defaults
and press
Enter
.
From the
Restore Defaults
menu, use the
Up
or
Down
arrow to select
full Restore
or
Config Restore
and press
Enter
.
If you are performing a full restore, you will be asked to confirm this action on the following
screen. At the
full Restore?
prompt, use the
Up
or
Down
arrow to select
Yes
and press
Enter
to confirm.
If you are performing a partial restore, you will be asked to confirm this action on the
following screen. At the
Config Restore?
prompt, use the
Up
or
Down
arrow to select
Yes
and press
Enter
to confirm.
!
Used to enter the edit mode and confirm
selection or entry.
Used to return to the previous menu
screen or exit the edit mode without
saving the latest entry.
Used to select items in the menu, move
between values in a numerical address
and modify numerical values.
For an example of this, turn to
IP Address Setting Configuration
in the Installation section.
Using the Front Panel Keys
Deletes all user-created recording aliases, media
servers, call configuration files, categories and
recording templates and restores them to v.3.x
defaults.
•
Deletes all conferences and media files.
•
Deletes all server logs.
•
If data location has been changed to an
external storage location (NAS), a full
restore will change the default storage
location back to the Content Server. Media
files on the NAS will not be deleted.
Restoring to defaults—both Config
Restore and Full Restore—
must not be
interrupted!
Logs are available in E:\
logs\SetupUtility.directory.
Display information on the
version currently installed.