Installation
TANDBERG IBM Lotus Notes/Domino v 11.3 - Installation & getting started guide
Page 21 of 49
Figure 11: Configuring the run-time of the Scheduled Synchronizer agent
7. Click the
Schedule…
button to open the
Agent Schedule
window. Set the interval to
0 hours and
15 minutes,
and verify that the
Run on
drop-down list is pointing to the correct server. Click
OK
.
8. Save and close the
Scheduled Synchronizer Agent
.
9. Close the database and Domino Designer.
Enabling agents in Resource Database (Notes/Domino V8.5)
1. Start Lotus Domino Designer and open the Resource Reservations Database that you created
earlier (normally called ―Video Conference Resources‖) by going to
File > Applicatio
n > Open…,
selecting the server where the database was created, and then selecting the database from the
list.
2. From the
Applications
pane, expand the
Code
item list to the left.
3. Double-click on
Agents
.
4. The main frame lists all the agents in the database (see Figure 12: Listing the Agents of the
database). Approximately 8 (depending on the Domino version) of the agents have yellow icons
next to them, marking them as disabled.
