Tandberg Data
BakStor Installation and Administration Manual
23
The following information needs to be entered:
Slice name. The name for the slice.
Slice size. This specified the maximum size the virtual tape can reach. Specifying 0
means no limit nd the virtual slice can grow until the RAID set underneath is full.
Click the ACCEPT button to create the virtual tape slice.
The screen will refresh and the virtual tape created will appear on the right side of the screen.
Figure 3-5. Entering details for a tape slice
Note: Tape Slice is allocated in 10GB blocks, so the size entered will be rounded up to the
nearest 10GB. Entering 27000MB, for example, would make the actual size created be
30,000MB.
