TANBead Maelstrom 8 Autostage, User Manual

Page: 35 / 40

33
19.8 Powering
It is feasible to use AC 100~240 (volts) for the adapter. DC 19 volts is used on the
Autostage. Notice: The heater button is the switch for the heated carriage plate; the
power button is the switch for the M8-H Autostage (excluding the heating function).
19.9 Standby Mode
After resetting or finishing the program, the Autostage will stay on the standby
mode. In this state, user can to move the heated carriage plate by using right / left
direction button ( / ) and holster by using down button ( ).