22
Auto-off Setting
User can use left and right keys of click wheel to move the
cursor and use up and down keys of click wheel to adjust the
time of Auto-sleep and Auto-shutdown. Click on Apply button
to save the setting.
NOTE: Shipping mode is used to protect the M8-H during
transportation. We do not recommend user to change this
setting without the authorization by manufacturer.
Beep & LCD Setting
User can use left and right keys of click wheel to move the
cursor and use up and down keys of click wheel to switch on
or off of the beep sound and adjust LCD backlight. Click on
Apply button to save the setting.
System Param Setting
User can use left and right keys of click wheel to move the
cursor.
NOTE 1: About Stand Connection
Please remain the connection
DISABLE
when user operates
the M8-H Individually. Please change the connection to
ENABLE
when the M8-H is connected to the M8-H Autostage.
The connection symbol (
) will be shown on the screen.
NOTE 2: About Rod offset
This value was set by manufacturer (TANBead) before shipping. This value affects the
performance of nucleic acid extraction. We DO NOT recommend user to change this
value without authorization. TANBead and our distributors are not responsible for any
consequences if the value was been changed by users.
Summary of Contents for Maelstrom 8 Autostage
