TAN Bead Smart LabAssist Series, User Manual

Page: 60 / 61

www.tanbead.com
59
5.6 Transmit program

If you want to transmit the program from a computer to a
machine, please save the program first, and then key in
the number of the program that you are going to transmit.

After that, click
“Export”
. If it is transmitted normally, a
word
“Success”
will appear in the lower left corner.
 If it is transmitted incorrectly, a word “
Fault
” will appear.

If you see
“File:#.xgp Not Find.”
, it means that the
program hasn’t been saved.

Before you transmit the program, please switch on the
power system of the machine.

You could transmit more than one program simultaneously
at the same time.