TAN Bead Smart LabAssist Series, User Manual

Page: 57 / 61

www.tanbead.com
56
Collect (S): working time of magnetic rod

The time using magnetic rod to collect magnetic beads.
(seconds)

999 seconds is the maximum.
: It takes 30 seconds to move the magnetic rod reaching
the lowest position. Therefore, do not set collect time
less than 30 seconds.
Rod: Used magnetic rod or not.
Drop-
down list to select “ON” or “OFF”.

OFF: Magnetic rods stay.

ON: Magnetic rods move down to collect magnetic beads.
Mixing Speed: the mixing speed of strip

There are four kinds of speed in the program. Use them to
control mixing speed.

Drop-down list to select highest, medium , slow or
slowest speed.
Volume: the volume of solution in well

Input numeral from 0 to 1200. ( unit is

l)

The working range of strip will is accord to the volume
high.
: It is recommended to use solution volume no more than
1000

l. It may cause cross contaminations over the
volume of 1000

l.