TAN Bead Smart LabAssist Series, User Manual

Page: 39 / 61

www.tanbead.com
38
Installation the SLA-E13200
1.1 Installation crew:
1.1.1 Instrument installation
：

With general electronic concepts, use the
Volt-Ohm-Milliammeter for inspection.

Pass the training of Automatic Platform for Magnetic
System.
1.1.2 Reagent testing
：

With polytechnic, biomedical background, could
communicate the operation question with customer.

Pass the training of nucleic acid reagent kit.
1.2 Installation Validation

Before plunging into the power cable, use
screwdriver remove fixing plate or crew.

To confirm the instrument relative documents are
correctly and completely.

Keep a distance around 5 cm for ventilated space.
1.3 Operation Validation

To operate, inspect in normal range, then confirm
each switch and controller could not only
functioning well but also in compliance with
intended use.

Before plunging into the power cable, use
screwdriver remove fixing plate or crew.