TAMURA NT matrix, Instruction Manual

Page: 9 / 40

NT MATRIX Instruction Manual (EN)
2D-53-00032500
1
1. Overview
NT MATRIX is a system interface with a built-in DSP processor that performs audio signal routing
matrix, mix and various signal processing.
It corresponds to various uses by combining audio input / output card and control card.
It also supports redundancy of power supply input and redundancy of audio signal processing section
(option), making it ideal for relaying, live broadcasting, program recording, television and radio studios
that require high reliability.
2. Features

Function
(1) 160ch x 160ch Audio Matrix Router
(2) Configurable DSP audio signal processing
(3) 6 card slots (2 of which correspond to 64 ch audio input / output)
(4) Analog, digital audio I / O card and GPIO, VCA control card option is avalable
(5) Logic setting of button ON / OFF information of GPIO and touch panel can be done by using
LOGIC function
(6) User interface can be freely created using GUI application
(7) EIAJ 19-inch rack mount size

Original technologies
(1) Built-in audio signal processing with a high dynamic range based on 32-bit floating point
operations. Mixing can be performed without being conscious of the internal level diagram.
(2) Redundant configuration of audio signal processing and controllers are available

Operational safety
(1) Power supply in a redundant configuration, allowing for Two AC inputs
(2) Applications that require high reliability are supported with a redundant configuration of audio
signal processing and controller-mounted DSP CARDs (optional).
(3) The system uses no advanced OS but is composed based on firmware, realizing high stability and
quick startup.