TAMURA NT matrix, Instruction Manual

Page: 30 / 40

NT MATRIX Instruction Manual (EN)
2D-53-00032500
22
9-4 IO CARD Installation Method
Install IO CARD in the following procedure.
* Dissipate the static electricity from your body sufficiently before you touch anywhere
CARDs.
9-4-1 Removing Blank Panel
Remove the two screws from the Blank Panel as shown in the figure below.
The blank panel will come off.
9-4-2 Install IO CARD
Insert the IO CARD straight and tighten the two places with the screw as shown in the figure
below.
* If the mounting of the screw is loose, you do not can use it in the correct state. Because the
electrical signal level is not stable.
M3x8 at 2 locations
M3x8 at 2 locations