TAMURA NT matrix, Instruction Manual

Page: 22 / 40

NT MATRIX Instruction Manual (EN)
2D-53-00032500
14
7-2 Front Panel
7-2-1 POWER/SYNC LAMP
POWER1
Lights up when AC power is input to AC INPUT 1 and the power supply is operating normally.
POWER2
Lights up when AC power is input to AC INPUT 2 and the power supply is operating normally.
SYNC
If it is synchronized with the selected signal, the lamp of the selection signal will be lit.
If it is not synchronized with the selected signal, the selection signal lamp flashes. In this case, it
operates with reference to the internal oscillator.
When the internal oscillator is selected, all lamps are turned off and operate with reference to the
internal oscillator.
* Select synchronization signal on the NT MATRIX Manager application screen.
7-2-2 DSP LAMP/BUTTON
ACT/STBY LAMP
PRIMARY DSP, SECONDARY DSP Displays which DSP CARD is operating.
ACT is lit DSP CARD is in operation. STBY is lit DSP CARD is in standby mode.
FAN LAMP
It lights up when the FAN of each DSP CARD is operating normally.
IO CARD SLOT
POWER/SYNC LAMP DSP LAMP/BUTTON