TAMURA NT matrix, Instruction Manual

Page: 33 / 40

NT MATRIX Instruction Manual (EN)
2D-53-00032500
25
6 Wait 30 seconds or more after turning on the power.
Initialization of internal data is completed within 30 seconds after turning on the power.
Caution. Do not turn off the power within 30 seconds after turning on the power.
7 Turn off the NT MATRIX power.
8 Remove the initialized DSP CARD.
Refer to "DSP CARD Installation Method" for detailed procedure.
9 Restore the dip switch set in procedure 3 to its original setting.
Set "3" and "4" of DIP switch "SW4" back to OFF setting. (Set all "1" to "4" of "SW4" to OFF)
10 Attach the DSP CARD to the main unit.
Refer to "DSP CARD Installation Method" for detailed procedure.