TP-72S (Rev 1.2)
- 28 -
TALON TECH CO. LTD.
7-2 Pump Parts Parts Dis/Assembly
7-2-1 Pump Cover Dis/Assembly
1. As per the below [PIC 1], use 2mm wrench to release Pump Cover Mounting M3 Screw(14ea) to
open the cover.
2. The assembly is the reverse order of the disassembly.
[Notice]
When the cover opens, be careful not to cut the finger.
Don
’
t dis/assemble the interior parts inside the pump.
7-2-2 Driving Shaft Condition Check & Grease up on Ball Screw
1. Check the motor
’
s vibration & noise when the pump works.
2. Check the bolts tightening condition and ball screw worn-out condition.
3. Check any interruption between cables & moving parts.
4. Check the conditions of linear bushing /shaft when the pump works.
5. Grease up on ball screw & LM linear bushing.
6. Grease up every 6 months.
[PIC 1]
Pump Cover
Cover Mounting Screws (14ea)
