TP-72S (Rev 1.2)
- 17 -
TALON TECH CO. LTD.
6-1 Operation
6-1-1 Notice
The pumps
’
ID, which are cable-connected to touch pad, are auto-searched every 5 sec. On every
lower menu, if there isn
’
t any input for 1 min, the initial screen is back. The pump, which is not
searched, cannot be chosen.
6-1-2 Pump Condition Indicate In Use
<Dispense> < Ready > <Not Connect>
6-1-3 Select Function
When ID is chosen, the above screen is shown.
ESC
-
Go to the previous menu.
Dispense
-
Dispense by touching the pad.
Recipe
-
Run Recipe & Dispense Recipe Setting.
Degas
-
Not Use
Config
-
Pump Mode, Reset, Error & ID Setting.
Calibration
-
Each recipe
’
s calibration setting.
Purge
- Not Use.
Touch Pad Operation
6
