TallyGenicom LGe06, Operator'S Manual

Page: 79 / 108

Chapter 3: Printer Menus and the Control Panel
3–79
Config Menu
⇒
Twinax/Coax
Host Font Style (Twinax Only)
When you set this parameter to Disabled, the host Page Presentation Media
command is ignored. This is used when you want to prevent the host from
overriding control panel Font Style settings. The default is Enabled.
IPDS: This option is not available.
Screen Size (Screen) (Coax Only)
The parameter allows you to set the screen size for the Coax screen copy function
(in non SCS Mode only). The default is 1920.
Case (Coax Only)
If you set this parameter to Mono, all uppercase characters print. In Dual mode,
upper and lower case characters print. This parameter applies in non SCS mode
only. The default is Dual.
Compatibility Switches (Coax Only)
The compatibility switch settings define how the printer responds to Form Feed
(FF), Carriage Return (CR), and New Line (NL - Carriage Return plus Line Feed)
codes. The function of some of these switches depends on the end of buffer or
printing past the right margin. This parameter applies to non SCS mode only.
All compatibility switches default to OFF.
Comp Switch 1
This switch determines the printer response to a CR Command located at the
right margin plus one character position. If OFF, the printer performs only a CR
and starts printing over the same line again without advancing the paper. If ON,
the printer performs an NL function, then begins printing.
Comp Switch 2
This switch determines the printer response to an NL command located at the
maximum print position plus one character position. If OFF, the printer per-
forms an NL function. If ON, the printer performs two NL functions.
Comp Switch 3
This switch determines whether or not a space is inserted at the beginning of the
first print line on each form. This switch works in conjuction with Comp Switch 6,
which determines how the printer responds to an FF command. If OFF, the
printer performs the FF and a Space function. Printing starts one space in from
the left margin on the first line of the next form.
Comp Switch 4
The settings of this switch are functional only if Comp Switch 7 is set to OFF.
Comp Switch 4 determines printer response to an FF command located at the end
of a buffer. If OFF, the printer performs an FF only. The new print location is the
first print position on the next form. If ON, the printer performs an FF plus an
NL. The print location is the first print position plus one line.