User guide
The Menu
42
Selecting the LC display
language
This section describes how to make settings in the menu, using the
selection of the national language as an example.
This example shows how to change from the English language to
the German language. The same procedure applies to the other lan-
guages (French, Italian and Spanish).
Select the Setup mode by pressing the Setup key.
Press the Menu key (1).
Setup mode and Menu mode may be disabled. Hold
down the
Setup
key while switching on the printer to
enable menu mode. If you want to enable access to this
mode permanently, you need to change the appropriate
setting in the menu; see
Menu lock (MenLock)
(page 56).
Press the Next key (4) several times until the display indicates Lan-
guage.
Press the Language key (3).
The display now changes to Parameter mode and indicates English
in the top line.
The lower line displays Set and Exit. The two arrows
<
(2) and
>
(3)
represent the symbols for parameter selection (“
<
” indicates de-
scending and “
>
” ascending). Press the
<
(2) or
>
(3) key until the
desired language is displayed, in our example German.
Save your selection by pressing the Set key (1). An acoustic signal
verifies this action.
Ready
Front1
M1 EPS
Online
Setup
2
1
3
4
Adjust
Paprpath
Menu
Char
Online
Setup
Print Macro
Online
Setup
Back
Next
2
1
3
4
MenLock Language
Online
Setup
Back Next
2
1
3
4
English *
Online
Setup
Set < > Exit
2
1
3
4
German *
Online
Setup
Set < > Exit
2
1
3
4
