User guide
Installation
6
Installation
Unpacking the printer
Place your printer on a solid surface (see
Placing
your printer
, page 7).
Make sure that the “Up” symbols point in the cor-
rect direction.
Open the packaging, take out the accessory cas-
sette and unpack it. Pull the printer out of the card-
board box towards you and remove the remaining
packaging material.
Check the printer for any visible transport damage
and completeness. Apart from this CD-ROM (
c
)
the Quick start guide (
d
), the power cable (
e
), the
ribbon (
f
) and the MMJ interface adapter (
g
)
should be included.
If you find any transport damage or if any accesso-
ries are missing, please contact your dealer.
2
f
e
c
d
g
