Jul 07
2-26
45 PPM Laser Printer User Guide
Interface Menu
* Delay Out Close-If this is on, the printer will delay between jobs for the last page of the job to be fully printed and
ejected. This is used when the host computer requires this mode of operation to allow certain statuses to be
returned during the end of job printing. When this is on, the throughput of the printer will decrease. This setting
applies to each of the IO ports.
Spooling
The spooling feature allows
print jobs to be
automatically spooled to
the Flash memory. This is a
diagnostic tool.
As the flash memory is
limited in size under some
circumstances the hard
drive may be required.
Start Spooling:
Off
Spool and Print
Spool Only
Destination:
User FLASH
Disk
Start Spooling:
Off
Spool and Print
Spool Only
Destination:
User FLASH
Disk
1. Press NEXT or PREVIOUS
to scroll through the
SPOOLING submenus.
2. Press SELECT to choose a
submenu.
3. Press NEXT or PREVIOUS
to scroll through the settings.
4. Press SELECT to save this
setting.
USB Setup
This submenu allows you to
set up the USB interface.
Interpreter:
Auto Switch
Format:
Raw
Delay Out Close:*
Off
Binary PS:
Off
Interpreter:
Auto Switch
PCL
PostScript 3
Format:
Raw
Normal
Binary
Delay Out Close:
Off
On
Binary PS:
Off
On
1. Press NEXT or PREVIOUS
to scroll through the
INTERPRETER, FORMAT,
*DELAY OUT CLOSE, and
BINARY PS submenus.
2. Press SELECT to choose a
submenu.
3. Press NEXT or PREVIOUS
to scroll through the settings.
4. Press SELECT to save this
setting.
Submenus
Default Setting
Available Settings
Procedure for Changing Setting
Summary of Contents for 9045N
Page 1: ...Jul 07 User Guide TallyGenicom 9045N Laser Printer...
Page 29: ...Jul 07 45 PPM Laser Printer User Guide 2 3 Printing a Configuration Summary...
Page 120: ...Jul 07 4 26 45 PPM Laser Printer User Guide When Moving the Printer...
Page 127: ...Jul 07 45 PPM Laser Printer User Guide 5 7 At the Fuser Unit 6 Open and close the top cover...
