TallyGenicom 9045N, User Manual

Page: 49 / 176

Jul 07
45 PPM Laser Printer User Guide 2-23
Interface Menu
Interface Menu
The Interface Menu provides access to the printer interface settings. Use the following procedure
to enter the interface menu:
1. Press the MENU button on the control panel.
2. Press the NEXT button until the text Interface Menu is shown on the second line of the
display.
3. Press the SELECT button to enter the interface menu.
4. Press the NEXT button to move through the submenus: Port , Parallel Setup , Network 1
Setup, Spooling , and USB Setup .
Use the procedures in the following table to access and change the printer interface settings:
Submenus Default Setting Available Settings Procedure for Changing Setting
Port
This submenu allows you to
enable the type of interface.
Parallel:
On
Serial: On
Network Card 1:
On
USB:
On Parallel:
On, Off
Serial: On, Off
Network Card 1:
On, Off
USB:
On, Off
1. Press NEXT or PREVIOUS
to toggle between
PARALLEL, NETWORK
CARD 1 and USB.
2. Press SELECT to save this
setting.
Parallel Setup
This submenu allows you to
set up the parallel interface.
Interpreter:
Auto Switch
Format:
Raw
Mode:
Bidirectional
Delay Out Close:*
Off
Binary PS:
Off
Interpreter:
Auto Switch
PCL
PostScript 3
Format:
Raw
Normal
Binary
Mode:
Bidirectional
Standard
Delay Out Close:
Off
On
Binary PS:
Off
On
1. Press NEXT or PREVIOUS
to scroll through the
INTERPRETER, FORMAT,
MODE, DELAY OUT
CLOSE, and BINARY PS
submenus.
2. Press SELECT to choose a
submenu.
3. Press NEXT or PREVIOUS
to scroll through the settings.
4. Press SELECT to choose and
save a setting.