1-51
1.6.3 Label Format Commands
The following commands will be valid if the label format command
interpreter is turned on with "STX" + "L," i.e. [02] L.
Set format attribute
A
Set format attribute
[1B]B
Setting offset in direction of column
C
Setting number of cuts (2-digit)
c
Setting pixel size in horizontal and vertical direction
D
Completion of setting printing contents (field preparation) and
printing labels
E
Entering previous-defined field character string into global table G
Setting print density (head heat factor)
H
Changing units from inch to metric system
m
Changing units from metric to inch system
n
Setting printable area speed
P
Setting backfeed speed
p
Specifying space between characters
[1B]P
Setting number of prints
Q
Setting offset in direction of row
R
Calling label format
r
Setting unprintable area speed
S
Storing label format
s
Specifying ending code
T
Setting previous field to character-string-replacement-mode
field
U
Completion of setting printing contents (field preparation)
X
TrueType font symbol setting
y
Setting slash zero
z
Setting addition of previous-defined printing contents (field
data) 1
+
Setting subtraction of previous-defined printing contents (field
data) 1
-
Setting addition of previous-defined printing contents (field
data) 2
>
Setting subtraction of previous-defined printing contents (field
data) 2
<
