1-48
Setting Printing Method
Code
[02] [1B] Mn
Setting
n T , D
T : Thermal transfer
D : Heat-sensitive
Function
Designates the printing method to be set; thermal transfer mode
where a ribbon is used, or heat-sensitive mode where heat-sensitive
paper is used.
Example
Shown below are examples of input data when printing in thermal
transfer mode.
Input data
[02] n
Sets units to inch
[02][1B] MT
Sets printing method to thermal transfer
mode.
[02] L
Starts label format mode
D22
Sets pixel size
191101001000050ABC
Sets character data "ABC" with smooth
font 48pt
E
Ends label format mode and prints
ABC
Direction of feed
Head disconnection detection
Code
[02] [1B] T
Function
Measures resistance value per dot on head heat-generation part and
checks whether head heat-generation part (resistance value) is
normal. If it is normal, [01] is transmitted to the computer and if it is
abnormal, [00] is transmitted to the computer.
Caution
The [0D] hex code is not added to the end of the transmission data.
