1-34
Setting printing position
Code
[02] O nnnn
Units
0.01 inch or 0.1 mm
nnnn
4-digit data
Initial value and its set range vary depending on the command set.
Inch system
Metric system
Command Set
Initial
value
Minimum
value
Max
value
Initial
value
Minimum
value
Max
value
DMI / DMW
0220
0120
0320
0559
0305
0813
DM4 / DM8
0220
0120
0320
0559
0305
0813
Setting
DPP
0110
0010
0210
0279
0025
0533
Function
Specifies the distance between paper sensor and print head. By
changing this value, a physical printing start position can be changed.
Caution
If value less than 0.5 inch (0050) is specified, the initialization value will
be set automatically. With the initialization value set, printing starts from
the bottom of the label. If the command is used after completing
printing, this command setting will not be effective to the first sheet of
the label. From the second sheet of the label, this will be effective.
Figure
Cutter Peeler
Print head Reference point
Onnnn = 1.10 inch (initialization value)
(peeling)
