Area of Rescue Command Unit
Installation Instructions
Model AOR-8 / Model AOR-16
Page
7
of
12
Rev. 8/18/2016
Copyright 2016 Talk-A-Phone Co.
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
4.
Move on to Programming the Talkaphone Area of Rescue Emergency Analog
Phones
Local Mode
1.
Pick up the built in handset and select the press the phone line corresponding to
the bank of phones/consolidator to be programmed (listen for 3 beeps)
2.
Enter Guard Access Code: *31**
3.
Program the consolidator for Local Mode: *37*
4.
Move on to Programming the Talkaphone Area of Rescue Emergency Analog
Phones
Day/Night Mode
1.
Call the consolidator or pick up the built in handset and select the press the
phone line corresponding to the bank of phones/consolidator to be programmed
(listen for 3 beeps)
2.
Enter Guard Access Code: *31**
3.
Program the consolidator for Day/Night Mode: *63*
4.
Program the consolidator to call either:
Local first, then Remote: *35*
Remote first, then local: *36*
5.
If a PBX line is being connected to the Telco
“IN” port enter the PBX code:
*39*2*
6.
Move on to Programming the Talkaphone Area of Rescue Emergency Analog
Phones
Programming the Emergency Analog Phones
Once each Consolidator has been programmed, each Talkaphone Area of Rescue
Emergency Analog Phone must be programmed individually. A call can be routed
to the desired phone port by entering the following code:
*4X*
Routes to Emergency Analog Phone in port jack number X (X=1-8)
For details on programming the Talkaphone Area of Rescue Emergency Analog
Phones, refer to the Installation & Operation Manual for Emergency/Information
phones. (Note: if the Consolidator is in Remote Mode or Day/Night Mode and your
remote phone line is a PBX extension, be sure to program the emergency phones
for Mode 2. See Emergency Phone Manual, pages 11 and 15 for more information
on Modes).
Code Summary
Command
Function
*31* …[up to 8 Guard Access Code entry for phone programming
Summary of Contents for AOR-8
Page 1: ......
