Area of Rescue Command Unit
Installation Guide
Model AOR-5 / Model AOR-10
Page
17
of
23
Rev. 4/13/2022
Copyright 2022 Talk-A-Phone, LLC
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Talkaphone, bAlert, Scream Alert, WEBS, and WEBS Contact are registered trademarks of
Talk-A-Phone, LLC. All rights reserved. All other trademarks mentioned in this document or website are the property of their respective owners and does not imply or indicate
any approval, endorsement, sponsorship, or affiliation with such owners unless such approval, endorsement, sponsorship, or affiliation is expressly indicated.
Timing/Dialing Options for the AOR-CSE Station
The timing/dialing option code is comprised of six (6) digits defined in the table below.
Parameter
Function
Values
Definition
A
Talk/Listen Delay.
Switching
time between talk and listen
modes (i.e. VOX switching time).
1
0.1 seconds
2
0.2 seconds
[Default]
3
0.3 seconds
4
0.4 seconds
5
0.5 seconds
6
0.6 seconds
7
0.7 seconds
8
0.8 seconds
9
0.9 seconds
B
Call Length.
Sets maximum
length of time the AOR-CSE
Station can be connected to a
call.
0
Disabled
1
1 minute
2
2 minutes
3
3 minutes
[Default]
4
4 minutes
5
5 minutes
6
6 minutes
7
7 minutes
8
8 minutes
9
9 minutes
C
Silence Time Out.
Sets the
length of time a call will be
connected without any voice
transmission.
0
Disabled
1
10 seconds
2
20 seconds
3
30 seconds
4
40 seconds
[Default]
5
50 seconds
6
60 seconds
7
70 seconds
8
80 seconds
9
90 seconds
D
Dial Next Number Timer.
Sets
the number of rings before the
AOR-CSE Station dials the next
phone number in the number list.
0
or
1
Disabled
2, 3, 4, … , 9
Dials next number after 2, 3, 4, … , 9
rings
E
Dial Next Number on Busy.
When a busy is detected the
AOR-CSE Station will dial the
next phone number in the
number list.
1
Disabled
2
Enabled
[Default]
F
Not Used
Always set to
1
.
-
