Area of Rescue Command Unit
Installation Guide
Model AOR-24 / Model AOR-32
Product Revision 2.0
Page
15
of
23
Rev. 3/8/2022
Copyright 2014-2022 Talk-A-Phone, LLC
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Talkaphone, bAlert, Scream Alert, WEBS, and WEBS Contact are registered trademarks of
Talk-A-Phone, LLC. All rights reserved. All other trademarks mentioned in this document or website are the property of their respective owners and does not imply or indicate
any approval, endorsement, sponsorship, or affiliation with such owners unless such approval, endorsement, sponsorship, or affiliation is expressly indicated.
Pick up the local phone handset and press the button corresponding to the bank of phones
(i.e. controller board) to be programmed handset (or remotely call into the connected
PSTN/POTS telephone line). Listen for one (1) beep.
2. Enter the Guard Access Code to enter programming mode:
*31**
3. Program the controller board for Mixed Mode:
*63*
4. Program the controller board with the call routing order:
•
Local phone first, then remote (off-site):
*35*
•
Remote (off-site) first, then local phone:
*36*
5. Repeat
Steps (1) through (5)
for the remainder of controller boards.
6. Move onto
Programming the AOR-CSE Stations
.
