TALEX Spółka z ograniczoną odpowiedzialnością
ul. Dworcowa 9c
77-141 Borzytuchom
tel. (59) 821 13 40
e-mail:
Page
34
of
59
Fig. 14. Machine properly secured for transport
Note that when the machine is being transported separate from the tractor e.g. on a
trailer or a lorry the PTO shaft should be appropriately secured e.g. strapped to the
machine. Do not use the PTO chains to support the weight of PTO shaft at any times as
they are only to be used to prevent PTO guards from spinning when at work.
Never
enable the Power Take Off when transporting the tractor mounted hay rake with
the connected PTO shaft
. After carrying out all of the actions described above go back
to the tractor cab, power the engine up and lift the mounted machine into the transport
height. Beware of clearance margins between the headstock, barriers and cab fixtures
when lifting with the very short top link.
10.5 Unlocking the machine after transport
Before starting work, we act in the opposite way to securing for transport.
The locking bolt must be removed to unlock the machine. To do this,
remove the safety lock, place it in the gripper and secure it with a cotter pin
(machine in raised position).
Machine properly secured
Pivot movement has
been stopped
Caution
Do not allow any person to stay near the machine
when folding it up for the transport.
