TALEX Spółka z ograniczoną odpowiedzialnością
ul. Dworcowa 9c
77-141 Borzytuchom
tel. (59) 821 13 40
e-mail:
Page
28
of
59
10.2 Linking to tractor
WARNING
Do not work with broken down machine or tractor.
Use only typical cotter/ linch pins supplied by the manufacturer.
Work with non-standard safety pins or without any safety pin is forbidden.
DO NOT WORK WITH THE TOP LINK PIN IN THE TRANSPORT POSITION AS IT
WILL CAUSE DAMAGE TO THE HEADSTOCK AND LOSS OF THE WARRANTY.
Lower linkage points
Top linkage system
Here the pin is located
in the transport position
(the slot further back is for
the smaller tractors).
The slide is for the working
position.
Support stand
Top link arm of
the three point linkage cat.I/II
Lower linkage arms of the three
point linkage cat. I/II
Top linkage system cat. I/II
Locking pin of
the support stand
Power Take-Off (PTO)
shaft
Linkage pin
cat. I
Linkage pin
cat. II
Linch pin
Cotter pin
Linkage pin cat. II
Figure 11. Linking of the hay rake to the tractor.
PTO shaft
Linkage pin cat. I
in the transport position
Linkage pin
slide
for
the working
position
Linkage pin
slot
for
the transport
position for
the smaller
tractors
Lower linkage point cat. I/II
