Talaris MiniMech 010, Documentation Kit

Page: 71 / 183

Doc. No. 8030760 / 02-EN
33
�������
�������
�������
Assembling/replacing parts
lower guide
Fit the reference guide to the lower
1
guide and fasten it with the four nuts
Fit holders and rollers into the lower
2
guide and fasten it by gently push at
each holder
Fit the prism shaft with the two plastic
3
washers
Carefully lever out the side plate and fit
4
the lower guide
Fasten the two plastic washers with the
5
four screws
Fit the plastic bearings and the c-clips
6
Assembling/replacing counter
rotating roller
Fit the bronze bearing and spring
7
Fit the bronze bearing and cogwheel
8
on the shaft and lock it with the c-clips
Fit the sensor plate and tighten the
9
four screws
Check that the deviation is less than
10
±05 (B)
D016640
D016641
D016642
D016643
1
2
3
4
5
6
9
8
10
�������
���� �
B
Removing and replacing parts