Talaris MiniMech 010, Documentation Kit

Page: 156 / 183

m~ÖÉ=QS= açÅ=kç=UMPMTRVLRJb==
= OMMUJNNJNT=
Item Name Read /
Write
Description Example
501 Reject reason counter RW Reads out information regarding the
reject reasons with coding as below.
1- Not seen in feed
3 - Close First, 4 - Close After
5 - Long A, 6 - Long B
7 - Thick A, 8 - Thick B
9 - Short A, 10 - Short B
11 - Thin A, 12 - Thin B
13 - Skew A, 14 - Skew B
To clear the reject counters, write ‘0’ to it. Thick A
RD/501/7
Short B
RD/501/10
WD/501/0
502 Error status counter RW Reads out information regarding the
number of error status with coding as
below.
1 – Feed failure
4 – Mistracked note at exit
5 – Too long at exit
6 – Blocked exit
10 – Transport error
12 – Double detect error
13 - Diverter error
14 - Wrong count
15 - Note missing at double detect
16 - Reject rate exceeded
20 - Non volatile ram error
22 - Operation timeout
23 - Internal queue error
To clear the error counters, write ‘0’ to it.
Transport error
RD/502/10
Feed failure
RD/502/1
WD/502/0
503 Machine status R The internal machine status can be read
out with this item.
The LEDs on the MMC flashes also these
numbers if any status but NO_ERROR
occurs. Se chapter 2.5.
10 – OPERATION_TIMEOUT
19 - FEED_SENS_ERROR
20 - FEED_ERROR
21 - TOO_MANY_REJECTS
30 - NOTE_STUCK_IN_FEED
31 - NOTE_STUCK_IN_DDA
32 - NOTE_STUCK_IN_DDB
33 - NOTE_STUCK_IN_TRT
42 - TRANSP_START_ERROR
43 - TRANSP_RUNNING_ERROR
55 - NOT_REACHED_DD
57 - NOT_REACHED_TRT
62 - UNEXPECTED_TRT_NOTE
70 - FEED_QUEUE_OVERFLOW
71 - DD_QUEUE_OVERFLOW
72 - DIV_QUEUE_OVERFLOW
73 - TRT_QUEUE_OVERFLOW
74 - REJ_QUEUE_OVERFLOW
90 - TOO_MANY_NOTES_DELIVERED
92 - TROAT_BLOCKED
93 - UNABLE_TO_CALIBR_THROAT
97 - UNABLE_TO_CALIBR_DDA
98 - UNABLE_TO_CALIBR_DDB
99 - NVRAM_ERROR
Machine status
RD/503