Talaris MiniMech 010, Documentation Kit

Page: 114 / 183

m~ÖÉ=Q= açÅ=kç=UMPMTRVLRJb==
= OMMUJNNJNT=
N fkqolar`qflk=
NKN mìêéçëÉ=
This document describes the application, session, data link and physical layer of the
communication protocol implemented in the M
INI
M
ECH
TM
.
The protocol is an emulation of the 1700 Series Single Denomination Dispenser (SDD)
firmware with exceptions described in appendix A.
The document is intended as a reference for system analysts and developers involved in
the task of integrating M
INI
M
ECH
TM
into dispensing automation products.
NKO lîÉêîáÉï=
This publication has been compiled and edited by Talaris Cash Dispensing AB. No form of
copies or disclosure of content to third parties is allowed without formal written authorisation
from Talaris Cash Dispensing AB.
Talaris Cash Dispensing AB can enhance or modify the technical characteristics of their
products at any moment, without previous notification to their users. Therefore, the
information contained in this manual might not be properly Systems can enhance or modify
the technical characteristics of their products at any moment, without previous notification
updated. For more accurate information, you should contact your local sales organisation.
Copies of this publication could be ordered through
Talaris Cash Dispensing AB, Flen, Sweden.
NKP sÉêëáçåë=
This document is valid from the following firmware configuration.
MMC 2011-02.03 and later