Talaris MiniMech 010, Documentation Kit

Page: 151 / 183

açÅ=kç=UMPMTRVLRJb= m~ÖÉ=QN=
OMMUJNNJNU=
Command X’52’X’44’ READ DATA
Command Message String:
T I S CC d nnn E B
Where: T = Start of Transmission X’04’
I = Comm. identity X’30’
S = Start of text X’02’
C = Command X’52’ X’44’
d = delimiter “/” X’2F’
nnn = item number(100) X’31’ X’30’ X’30’
E = End of text X’03’
B = BCC
Notes: This example shows when item 100 is read. ( RD/100 )
Reply Message String:
H I S D
DDDDDDDD
E B
Where: H = Start of header X’01’
I = Comm. identity X’30’
S = Start of text X’02’
D = DATA0 X’30’
DDDDDDDD = X’32’ X’30’ X’31’ X’31’ X’30’ X’31’ X’30’ X’33’
E = End of text X’03’
B = BCC
Notes: DATA0 - Status code is 30 hex ( ‘0’ ) if the RD command was legal.
DATA0 - Status code is 4F hex ( ‘O’ ) if the RD command was illegal.
In this example is DDDDDDDD = “20110202” which is the program ID in the
MINIMECH
TM
.
The reply data string ( DDDDDDDD), has varying length depending on which item that
is read.
Command Time out:
The recommended time out for this command is 10 seconds.
Status Codes:
See chapter 5.2 status code cross-reference