TALARIA STING R L1E, Owner'S Manual

Page: 31 / 53

TALARIA POWER TECH
Charging and Battery Information
charger into the grid socket first, and then, please be sure to connect the charger and battery charging interface properly within 3 seconds. Otherwise,
the battery cannot be detected, the charger will run the protection setting, and automatically shut down!
5. When the red indicator of the charger flashes, it indicates that charging is ongoing. When the green indicator of the charger is on, it indicates that
the battery is fully charged. Usually, the charging time will be 2~4 hours to fully charge the battery, it will depend on the SOC of the battery and the
user’s choice of charger.
6. The charger will shut down automatically after the battery is fully charged. But it’s strongly suggested that always avoid connecting the charger to
the grid socket for a long time, which shall not exceed 6 hours.
7. It is strictly prohibited for untrained people to disassemble the battery, otherwise, may lead to battery damage and danger.
8. When the battery enters inactive status, it can be activated with the activating button or by connecting the charger.
Charging Precautions
1. When charging, please park your motorcycle or put battery in a safe place out of the reach of children.
2. The internal temperature for the battery which has just been discharged is high. Do not charge it immediately. It’s recommended to charge the
battery after ventilation and heat dissipation for 30 minutes.
3. Avoid using the battery immediately after it is fully charged. Let it stand for 10 minutes before using.
4. It is strictly prohibited to cover the charger with any object when using it. This charger is for indoor use. Please use it in a dry and well-ventilated
place.
5. In case you find peculiar smell or high temperature during charging, or the battery is not fully charged after charging for a long time, please stop
charging immediately and send it to the local dealer for maintenance.