TALARIA POWER TECH
Controls and Components
Wheel
: Press SEL DOWN to enter into “Wheel” setting interface. Then, press SAVE
to start selecting wheel diameter by pressing SEL UP or SEL DOWN, and finally,
press SAVE to save the setting. The incorrect diameter setting will cause the
incorrect speed indication. The default wheel diameter setting is 17inch.
Notice:
The wheel diameter refers to
the rear driving wheel
. If you choose the
wrong wheel diameter, your motorcycle will still run with no problems. But the
Speedometer will display the incorrect real-time speed.
Gr
:
Press SEL DOWN to enter into “Gr” setting interface. Then, press SAVE to start
selecting gear ratio by pressing SEL UP or SEL DOWN, and finally, press SAVE to
save the setting.
Notice:
1:4.7 for 25T, 1:6.9 for 36T, 1:7.5 for 40T, 1:8.4 for 44T, 1:9.1 for 48T, 1:9.5
for 50T, 1:11 for 58T
.
If the gear ratio you chosen does not match the sprocket on
your motorcycle. Your motorcycle will still run with no problems. But the
Speedometer will display the incorrect real-time speed.
Summary of Contents for STING R L1E
