TALARIA STING R L1E, Owner'S Manual

Page: 30 / 53

TALARIA POWER TECH
Charging and Battery Information
CAUTION:
Sideslip may happen in the case that only applicate front brake or rear brake. It is safer to applicate combined braking. When the motor temperature
and controller temperature is high, or the battery power is too low, the power output will automatically decrease. This is not a malfunction. After the
temperature back to be normal, the motorcycle will automatically have the full power output again.
Battery Charging and Charger Usage
1. Battery Discharge Port 2. Breather Valve
3. Battery indicator 4. Activating Button
1. The electric motorcycle uses a customized lithium-ion battery charger. Do not use other chargers, or it may cause battery damage or danger.
2. Check whether the input voltage of the charger is consistent with the grid voltage AC110V/AC230V.
3. The battery can be charged on your motorcycle through the On-Bike Charging Interface, or you can also get out the battery to charge directly.
4. When charging, the charger and battery charging interface must be connected properly before connecting the charger to the grid socket. After
charging, disconnect the charger and grid socket first, and then disconnect the charger and battery after the indicator light goes out. If you plug the
On-Bike Charging Interface
Battery Charging Interface