Takstar EX-3, User Manual

Page: 28 / 36

Ⅲ Microphone Processing Interface
3 4 5
8
6
1
2
7
EX-3
1. The adjustment area of PEQ curve: Adjust the frequency and gain parameters by dragging
the frequency point (small dot), and change the frequency of the low cut point by dragging
the small square. Click "Show all EQ parameters" to display the frequency, gain, and
bandwidth parameters of all PEQ points, and click "EQ reset" to restore all PEQ parameters
to factory default.
2. The display area of PEQ parameters: You can manually input data to change the frequency,
Q value and gain of the corresponding frequency point. Filter types (low shelf, high shelf,
low cut, high cut) and bypass function keys are available.
3. The PEQ parameter slider can change the currently selected PEQ parameters (frequency,
bandwidth, gain).
4. The low-cut frequency of the microphone can be adjusted. The low-cut filter types of
BUTTERWORTH-6dB--24dB/ BESSEL-6dB--24dB/LINK-12dB--24dB and a bypass function
key are available.
5. There are six levels of feedback suppression. Press the "Off" button to turn off the feedback
suppression function.
6. The independent input volumes of 4 microphones can be adjusted.
7. The noise gate function of MIC input can be turned on and off.
8. The total MIC volume can be controlled and handled accordingly.
27
Multifunctional Digital Power Amplifier