Takstar EX-3, User Manual

Page: 32 / 36

Wireless MIC Specifications
Frequency Range: 470-960MHz
Frequency Response : 50Hz-16KHz
Number of Adjustable Channels: 200
Oscillation Mode: PLL digital phase-locked loop
multi-channel frequency synthesis
Frequency Stability: ±5ppm
Modulation Method: broadband FM
RF Power: high power: 30Mw; low power: 10mW
Distortion: ≤ 0.3%
Power Consumption: high power 120mA; low
power 100mA@3V
Maximum Frequency Deviation: ±50KHz
Spurious Suppression: 80dBu
Pilot Frequency: 30kHz/30.72kHz
Operating Range: 50m
DSP Specifications
Frequency Response: 20Hz-20kHz, -0.5dB
S/N Ratio: >105dBu
Distortion: <0.01% at 1kHz (0dBu)
Crosstalk: >70dBu, 20Hz-20kHz
MIC Input Jack: unbalanced 6.3mm JACK
MIC Max Gain: 30dBu
MIC Input Impedance: 2KΩ
Music Input Jack: unbalanced RCA
Music Input Level: +12dBu
Music Input Impedance: 1MΩ/Stereo
Bluetooth Input: Bluetooth 5.0, Class2 4dbM frequency: 2.4G
Fiber Input: 24bit 48KHz
Coaxial Input: 75Ω
Front Output Port: 1 set of balanced XLR, 1 set of unbalanced RCA
Front Output Level: +12dBU
Front Output Impedance: <500Ω
Digital Processing: 32-bit DSP, 48kHz sampling rate, 24-bit sigma-delta A/D, D/A conversion
Display: 5" TFT with touch control 480x854 (RGB)
Note: The data is tested by Takstar Laboratory, and Takstar has the final interpretation right!
EX-3
■ Specifications
Power Specifications
4Ω Input Power: 750Wx2
8Ω Input Power: 450Wx2
THD: <0.02%
Frequency Response: 20Hz-20kHz, +/-1dB
Input Impedance: 10k
Input Sensitivity: 0dB
S/N Ratio (20Hz-20KHz, 4Ohms): >100 dB
Channel Separation (1KHz, 4Ohms): >70dB
Damping Factor (10-400Hz, 8Ohms): >300
Output Stage: Class D
Protection: short circuit, DC output,
overheating, overload
Startup Delay: 1S
Output Socket: red and black banana
socket
Other Specifications
Power Supply: AC 220V 50Hz
Weight (Net): 6.6Kg
Dimensions (WXDXH): 438X350X88mm
31
Multifunctional Digital Power Amplifier