Takstar EX-3, User Manual

Page: 30 / 36

Ⅴ Center Output Interface
3 4 5
1
2
6 7
EX-3
1. The adjustment area of PEQ curve: Adjust the frequency and gain parameters by dragging
the frequency point (small dot). Click "Show all EQ parameters" to display the frequency,
gain, and bandwidth parameters of all PEQ points, and click "EQ reset" to restore all PEQ
parameters to factory default.
2. The display area of PEQ parameters: You can manually input data to change the frequency,
Q value and gain of the corresponding frequency point. Filter types (low shelf, high shelf,
low cut, high cut) and bypass function keys are available.
3. The PEQ parameter slider can change the currently selected PEQ parameters (frequency,
bandwidth, gain).
4. The low-cut frequency and slope of the center output are adjustable, and there is a bypass
function key.
5. The center delay is adjusted in the range of 0-100ms.6. The threshold value of the
compressor is adjustable. Click the "Set" button to set the ratio, start time and recovery
time.
7. The volume of the center output is independently controllable, so are the phase and mute
functions.
29
Multifunctional Digital Power Amplifier