2-29
CONTROLS
INSTRUMENT CLUSTER
1. Vehicle and engine emergency lamp
This lamp flashes and an alarm sounds if
there is a problem with the machine. Go to
the “Failure Record (FAILURE RECORD)”
from the side menu screen, get the vehicle
or engine error code number, and then
consult your sales or service dealer
referring to the “Vehicle error code list” or
“Engine error code list” in this manual.
Refer to “Side menu screen” on page
2-39.
Refer to “Failure Record (FAILURE
RECORD)” on page 2-46.
Refer to “Vehicle error code list” on pages
6-12 and 6-13.
Refer to “Engine error code list” on pages
6-14 to 6-21.
2. Engine oil pressure warning lamp
This lamp flashes and an alarm is sounded
if the lubricant oil pressure abnormally low
while the engine is running.
3. Battery charge warning lamp
This lamp flashes and an alarm is sounded
if a problem rises in the charging system
while the engine is running.
4. Coolant temperature warning lamp
This lamp flashes and an alarm is sounded
if the engine coolant temperature
becomes abnormally high while the engine
is running.
5. Fuel level warning lamp
This lamp turns on if the fuel level
becomes low while the starter switch is in
the ON position.
6. Air cleaner warning lamp
This lamp flashes and an alarm is sounded
if the air cleaner filter is clogged while the
engine is running.
INDICATORS
7. Glow lamp
This lamp goes out when the engine
preheating is completed.
8. Travel speed lamp
This lamp turns on when the travel speed
button is set to the 2nd (high) speed.
9. Deceleration lamp
This lamp turns on when the deceleration
button is pressed. The lamp lights up to
indicate that the engine is in the
deceleration mode at low idling speed
(1150 rpm).
It flashes When the automatic deceleration
switch is pressed to indicate that the
machine is in the automatic deceleration
mode.
Refer to “Deceleration button” on page
2-49.
Refer to “Automatic deceleration switch”
on page 2-55.
METERS
10. Water temperature gauge
Indicates the temperature of the engine
coolant water.
The LED should be within the green
range during machine operation.
The red range indicates overheating.
11. Fuel gauge
Indicates the amount of fuel in the tank.
Be sure to top off the tank before running
out of fuel.
Summary of Contents for TB260
