Takeuchi TB260, Operator'S Manual

Page: 18 / 305

1-8
SAFETY
PRECAUTIONS WHEN
PREPARING
Know the work area
Before starting operation, know the working
area condition to ensure a safety operation.
• Inspect the topography and ground
condition of the working area, or the
structure of the building when working
indoors, and take the safety precautions as
necessary.
• Be sure to avoid all hazards and
obstructions such as ditches, underground
lines, trees, cliffs, overhead electrical wires,
or places where there is a danger of falling
rocks or slides.
PRECAUTIONS WHEN PREPARING
• Check with the administrator for the
locations of buried gas pipes, water pipes
and power cables. If necessary, determine
what specific precautions must be taken to
insure safety by consulting with the
administrator.
• When working on roads, be sure to
consider the safety of pedestrians and
vehicles.
· Use a flag person and/or a signal.
· Fence off the working area and keep off
unauthorized persons.
• When working in water or crossing shallow
streams or creeks, check the depth of the
water, the solidity of the ground and the
water flow speed beforehand.
Refer to “Cautions on operating” for further
instructions.
• Do not perform the DPF regeneration if the
machine is surrounded by flammable items
such as plants, trees, dry grass,
wastepaper, oil and waste tires. There is a
risk of fire due to the high-temperature
exhaust gas emitted from the DPF.
DPF: Diesel Particulate Filter
• The DPF may automatically perform the
regeneration while the engine is left
running. Make sure that there are no
flammable items around the DPF and the
exhaust line, and also that the engine hood
is closed to prevent fire. Be careful not to
burn yourself on the high-temperature
exhaust gas.
• Do not perform the DPF regeneration in
poorly-ventilated indoor spaces, as smoke
may be generated during the regeneration.
<Applicable machine models 126100003
or later>