Takeuchi TB175, Operator'S Manual, Page: 208 / 231

205
OPTIONS
Second / Fourth Auxiliary
Hydraulic Switches
Slider switch (Proportional control) and
Buttons
Move or press those switches to control the
flow of the oil in the fourth auxiliary hydraulic
lines.
(G) ..... Hydraulic oil flows to left auxiliary
line(g)
(H) ..... Hydraulic oil flows to right auxiliary
line(h)
¡
When the safety lock lever is set to the
lock position, this control is locked.
Disconnecting the hydraulic circuits
1. Release the pressure remaining in the
lines.
When equipped with accumulator :
Refer to page 199 “Releasing the residual
pressure”.
2. Disconnect the lines from ports (g) and
(h).
3. Install the plugs.
Fourth Auxiliary Hydraulics
Selector Button (2-Piece boom)
WARNING
Pressing (switching ON or OFF) the
selector button while the boom swing
pedal is depressed is dangerous, since
the attachment will move unexpectedly.
Always set the boom swing pedal back
to the neutral position before operating
the selector button.
This button changes from the boom swing
operation to the intermediate boom
operation.
Press this button to change over to operation
of the intermediate boom . The intermediate
boom operation indicator lamp will light. One
more press of this button will result in a return
to boom swing operation. Actual operation
is performed with the boom swing pedal.
Operation of the first auxiliary hydraulic
switch push button: left side (A) only.